SECURAM--SAFELOGIC DIRECT DRIVE – RESET to Factory Default.

You MUST HAVE a valid code to the lock- either the MRC/Master/Manager or User.

Step 1. Disconnect power- either remove Entrypad from dial ring or disconnect cable from lock body.

Step 2. Poke and Hold Reset button on the Lock body - 1 beep, release the press

Step 3. Enter the known code – either user or manager.

**Notice-  all the buttons will go dead after the code is entered

Step 4. Poke and Hold Reset again.

Codes will be back to 111111 and 123456