- Place palm over the face of the Entrypad
- Grasp the outer ring then turn the ring counter clockwise (to the left) about a quarter of an inch
- The ring will lift off the face of the Entrypad
- The battery will be tucked in the lower right side of the Entrypad housing
- Insert finger in the left side to push battery out on the right side
- Unclip battery from the battery lead
- Clip on a new, good Duracell or Energizer 9 Volt Alkaline battery
- Carefully tuck the battery back into the battery storage area, ensuring wires are safely tucked in
- Place ring around the outer edge of the Entrypad
- Rotate to the right, to lock into place (about 1/4 inch of turn)
Comments
0 comments
Please sign in to leave a comment.