ScanLogic Basic - Add / Delete Fingerprints and Users – SECURAM Systems

Add Manager fingerprint(s):

Step 1:	Unlock the door with the Manager code/fingerprint All programming should be done with the door in the open position. Locking and unlocking may be tested with the door in the open position.
Step 2:	After entering manager code, Hold "+", until you hear 2 beeps
Step 3:	Place the finger on the reader, lift and place with each beep - 4 times.
Step 4:	2 beeps confirm fingerprint addition

*Manager can add up to 5 fingerprints - repeat the above steps to add more prints to this account.

Add User1 Code:

Step 1:	Unlock the door with Manager code/fingerprint All programming should be done with the door in the open position. Locking and unlocking may be tested with the door in the open position.
Step 2:	Hold "1", until you hear 1 beep
Step 3:	Enter new 6 digit code, 1 beep
Step 4:	Repeat new 6 digit code, 2 beeps confirm user addition

Add User2 Code:

Step 1:	Unlock the door with User1 code/fingerprint All programming should be done with the door in the open position. Locking and unlocking may be tested with the door in the open position.
Step 2:	Hold "1", until you hear 1 beep
Step 3:	Enter new 6 digit code, 1 beep
Step 4:	Repeat new 6 digit code, 2 beeps confirm user addition

Add your own fingerprints:

Step 1:	Unlock the door with your own code/fingerprint All programming should be done with the door in the open position. Locking and unlocking may be tested with the door in the open position.
Step 2:	Hold "+", until you hear 1 beep
Step 3:	Place fingerprint 4x, 1 beep after each scan
Step 4:	2 beeps confirm fingerprint addition

*User1 & User2 can add up to 5 fingerprints

Delete your fingerprints:

Step 1:	Unlock the door with your code/fingerprint All programming should be done with the door in the open position. Locking and unlocking may be tested with the door in the open position.
Step 2:	Hold "-", until you hear 2 beeps -- all prints for that code will be deleted.

Related articles