ScanLogic - Replacement

Problem: My ScanLogic Entrypad stopped working. I only have another ProLogic. Can I swap?

Solution:

On the ScanLogic D Series (10 buttons membrane), a ProLogic would have the same code format. Programming a ProLogic with the same Super code of the ScanLogic would Link to the old lock body.

Use the Super code to unlock the door.

If a similar Scanlogic Entrypad is available, program the entrypad with the same supercode as the old bad entrypad.  Then plug into the lock. Then enter the supercode to unlock.

Codes are stored in the Entrypad but the Super/Master code is linked with the lock body inside the door.