Issue: When the code for User ID03 - User ID30 is entered, the entrypad display says "All User Disabled"
Solution: Manager Mode is Enabled.
Manager Mode is a function that allows you to toggle off/on User Codes by entry of the Manager
Code ID01 or ID02.
Solution: Either enter the manager code (ID01 or ID02) to enable to user access.
If the Manager Mode is not a desired feature, use ID00 to "Disable Manager Mode"
This menu selection allows you to set the Manager Mode as described above.
| Step 1: |
Press the Menu/OK button. |
|
| Step 2: | Use the up and down arrows to scroll to the System Menu and Press OK. | |
| Step 3: |
The display will prompt you to enter a valid code. Enter the Super Code (ID00). This function is not available in the menu accessed by the Manager Code (ID01). The “Select Menu” message will be displayed as follows: |
|
| Step 4: |
Scroll down to the menu selection “Disable Manager” and Press OK. |
|
Manager Mode is now disabled. ID01 and ID02 functionality have been restored to the original.
Comments
0 comments
Please sign in to leave a comment.