In this programming step, you can specify or “authorize” which Users will have to each of the locks. Administrative account (ID00,ID01 or ID02) is necessary to accomplish this.
|Step 1:||Press the Menu/OK button.|
|Step 2:||Using the up and down, scroll to the System Menu and Press OK.|
The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or the Manager Code (ID01 or ID02). The “Select Menu” message will be displayed as follows:
|Step 4:||Use the arrows to scroll to the menu selection “Authorize Locks” and Press OK.|
|Step 5:||Select the range of User IDs to have access to these locks. The system will display programmed users. First, select the beginning of the range “From USER ID XX”. Use the up and down buttons to navigate to the desired User ID.|
|Step 6:||Select the uppermost User ID to be authorized. Use the arrows to navigate to
the desired User ID. Press OK.
|Step 7:||The LCD will display the current settings for these users.|
In the example below, this group of users is authorized to open Lock 1, but it does not have access to Locks 2, 3, or 4.
An “O” means that Lock can be “Opened”, while an “X” means the lock is not authorized to be opened.
In order to authorize access to these individual locks, press the corresponding number
on the EntryPad to toggle “O” or “X”.
- Press 1 to toggle access for lock 1
- Press 2 to toggle access for lock 2
- Press 3 to toggle access to lock 3
- Press 4 to toggle access to lock 4
Once the access permissions have been authorized, press OK